Disassembly-continued - TM-9-2320-279-20-10679

TM 9-2320-279-20-1

Electrical System Maintenance Instructions (Cont)

(2) Remove connector (4) from grommet (5).

NOTE

Tag and mark all wires before removing.

(3) Remove four wires (6) from connector (4).

(4) Remove grommet (5) from ENGINE HIGH IDLE

box (3) and four wires (6).

NOTE

LATCH and ON/OFF switches are removed in a

similar manner.

Tag and mark all wires before removal.

(5) Remove two nuts (7) and lockwashers (8) from

switches (9 and 10).

(6) Remove two switches (9 and 10) from ENGINE

HIGH IDLE box (3).

NOTE

One wire on LATCH switch center terminal is not

connected to relays. Refer to Figure 7-1.

(7) Remove four screws (11), lockwashers (12), and six

wires (13 and 6) from two switches (9 and 10).

(8) Remove two connectors (14) from two relays (15).

7-27