Removal-continued - TM-9-2320-279-20-10561

TM 9-2320-279-20-1

Fuel System Maintenance Instructions (Cont)

NOTE

Some vehicles have nuts, lockwashers, and screws. Others have flanged nuts and screws.

(3)

Remove four nuts (5), three lockwashers (6), four washers (7), one ground wire (8), two

lockwashers (9), and four screws (10).

NOTE

There are two models of fuel-water separators. Model A has two wires connected at the

bowl. Model B has two wires at the back of the cylinder ring. Do step (4) for Model A. Do

steps (`4.1) and (4.2) for Model B.

(4)

Disconnect ground wire (8) and electrical wire (11) from fuel water separator (2).

(4.1)

Cut harness wire (11.1) at connector (11.2).

(4.2)

Cut connector (11.2) from fuel-water separator wire (11.3).

(5)

Disconnect fuel line (12 and 13).

(6)

Remove two elbows (14) and two elbows (15).

(7)

Remove two preformed packings (16) from elbows (14).

(8)

Remove hose (17) from drain valve (1).

4-35

Change 3