AIR CLEANER ASSEMBLY REMOVAL/INSTALLATION.

TM 9-2320-279-20-1

Fuel System Maintenance Instructions (Cont)

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. To avoid injury or death, keep away from open fire

and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or

clothing, wash immediately with soap and water.

(9) Coat threads of fittings (10 and 11) and elbow (12) with pipe thread sealing compound.

(10) Install fitting (10).

(11) Install elbow (12) and fittings (13 and 11).

(12) Connect air restriction indicator hose (14) and tighten.

(13) Install clamp (15) on air compressor supply hose (16) and connect to fitting (17).

(14) Tighten clamp (15).

c. Follow-on Maintenance.

(1) Install engine side panel (TM 9-2320-279-10).

(2) Close engine cover (TM 9-2320-279-10).

END OF TASK

4-5. AIR CLEANER ASSEMBLY REMOVAL/INSTALLATION.

This task covers:

c. Follow-on Maintenance

a. Removal

b. Installation

INITIAL SETUP

References

Models

None

All

Test Equipment

Equipment Condition

None

Condition Description

TM or Para

TM 9-2320-279-10 Shut off engine.

Special Tools

Air filter element removed.

Para 4-3

None

Ether starting aid removed.

Para 4-12

Supplies

Special Environmental Conditions

None

Personnel Required

General Safety Instructions

MOS 63S, Heavy wheel vehicle mechanic (2)

None

WARNING

If NBC exposure is suspected, all air filter media should be handled by personnel wearing

protective equipment. Consult your unit NBC officer or NBC NCOfor appropriate handling

or disposal instructions.

4-11

Change 3