 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-279-20-1
Engine Maintenance Instructions (Cont)
3-6. OIL COOLER INLET ELBOW AND FLANGE ELBOW
REMOVAL/INSTALLATION (CONT).
CAUTION
When replacing hose or hose clamps with
new parts, hose and clamps must be
replaced.
Install hose (10) on oil cooler inlet
(6)
elbow (11).
Slip hose clamps (12) over hose (10).
(7)
Tighten constant torque clamps to
100 in-lb (11.3 Nm).
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(8)
Coat threads of fittings (13) and
plug (14) with pipe thread sealing
compound and install on oil cooler
inlet elbow (11).
(9)
Install gasket (15), and oil cooler
inlet elbow (11) on oil cooler (16)
with four screws (17), and
lockwashers (18).
(10)
Install hose (10) to water pump (19).
(11)
Tighten clamps (12).
(12)
Install hose (21) on fitting (13) and
tighten clamp (22).
3-16
Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals