WINCH CABLE WILL NOT PAY OUT (M984E1)-continued

9-2320-279-20-1

Troubleshooting Malfunctions (Cent)

TROUBLESHOOTING INSTRUCTIONS

12-15.

2-9. Troubleshooting

Malfunction

Test or Inspection

Corrective Action

HEAVY-DUTY WINCH

1.1.

WINCH CABLE WILL NOT PAY OUT

)

NOTE

Batteries must be disconnected.

Step 7. Disconnect connector from winch OUT solenoid. Set all electrical switches for remote

operation (TM 9-2320-279-10). Check resistance of wire 682 from contact 2 on winch OUT

connector to pin B at electrical control box.

If resistance is more than zero ohms, repair wire 682 or replace winch out

connector<

Step 8. Check wires in remote control cable for continuity.

If resistance is more than zero ohms, repair wire or replace connector.

If problem remains, notify the supervisor.

2-184