WINDSHIELD WIPERS DO NOT OPERATE-continued

TM 9-2320-279-20-1

Troubleshooting Malfunctions (Cont)

2-15. TROUBLESHOOTING INSTRUCTIONS (CONT).

Table 2-9.

Troubleshooting (Cont)

Malfunction

Test or Inspection

Corrective Action

ELECTRICAL SYSTEM (CONT)

22. WINDSHIELD WIPERS DO NOT OPERATE (CONT).

Step 3.

Remove side panel (para 7-39). Place negative (--) probe to a ground and touch positive (+)

probe to socket red wire (wire 1917) on electric wiper/washer control switch connector. Turn

engine start switch to ON position. Meter should show 24 vdc.

If 24 vdc is not present, replace electric wiper/washer harness (para 18-9.4).

If 24 vdc is present, go to step 4.

2-134.8

Change 6