FRAME 3 - TM-9-2320-211-34-2-30421

9-2320-211-34-2-3

FRAME 3

Put two washers (1) and chain (2) on 3/8-inch diameter 4-inch bolt (3). Slide

bolt through any outer hole in gear and bearing assembly (4).

Put other end of chain (2) on bolt (3). Put on two washers (5) and nut (6).

Join hoist to chain (2).

WARNING

Be careful when putting back gear and bearing assembly

(7) to avoid damaging gear teeth and injury to personnel.

Soldier A 4.

Guide gear and bearing assembly (7) off wooden blocks to turntable

assembly (8) when soldier B lifts it.

Soldier B 5.

Using hoist, lift gear and bearing assembly (7) off wooden blocks and

move it over turntable assembly (8). Lower gear and bearing assembly

until it almost touches turntable assembly.

Turn gear and bearing assembly (7) so that bolt (3) goes into access

Soldier A 6.

hole (9) when soldier B lowers gear and bearing assembly onto

turntable assembly (8).

Soldier B 7.

Lower gear and bearing assembly (7) onto turntable assembly (8).

GO TO FRAME 4

17-405