FRAME 2 - TM-9-2320-211-34-2-20050

TM 9-2320-211-34-2-2

FRAME 2

C h e c k that end plate (1) is not cracked or distorted and that threads are

n o t damaged. If end plate is damaged, get a new one.

C h e c k that fitting (2) is not corroded or scored, and that threads are not

d a m a g e d . Using micrometer, check that bore of fitting is between 1.2505 and

1 , 2 5 2 0 inches. If fitting is damaged or not within given limits, get a new one.

C h e c k that stem (3) is not corroded or damaged in any way. Using no. 00

s t e e l wool, take off corrosion. If stem is damaged, get a new one.

C h e c k that spring (4) is not damaged. Using ruler, check that free length

o f spring is 3 1/2 inches. If it is not this length, get a new one.

P u s h down on spring (4) until it is 1 9/32 inches high and let it go back to

i t s full height. Measure spring length again. If it is not 3 1/2 inches, get

a new one.

GO TO FRAME 3

11-34