CONTROL VALVE RESISTOR ASSEMBLY (MODEL 8460-C24) REMOVAL, TEST, AND REPLACEMENT.

TM 9-2320-211-20-3-2

21-7. CONTROL VALVE RESISTOR ASSEMBLY (MODEL 8460-C24) REMOVAL, TEST,

AND REPLACEMENT.

WARNING

Smoking, sparks or open flame are not allowed

within 50 feet of work area during this task.

7/16-inch wrench

TOOLS: Flat-tip screwdriver

3/8-inch wrench

11/32-inch socket wrench,

1/4-inch drive

13/16-inch wrench

SUPPLIES: None

PERSONNEL: One

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

a. Preliminary Procedures.

(1) Open hood. Refer to TM 9-2320-211-10.

(2) Disconnect battery ground. Refer to Part 1, para 7-44.

NOTE

Tag all wires before taking them off so they can

be put back in their right place.

b. Test.

FRAME 1

1. Using screwdriver, turn screw (1) 1/4 turn and take off guard (2).

GO TO FRAME 2