CHAPTER 21. MAINTENANCE OF MATERIAL USED IN CONJUNCTION WITH MAJOR ITEMS

TM 9-2320-211-203-2

MAINTENANCE OF MATERIAL USED IN CONJUNCTION

WITH MAJOR ITEMS

Section I. SCOPE

21-1. EQUIPMENT ITEMS COVERED. This chapter gives equipment maintenance

procedures for winterization kits, deep water fording kit, and special purpose kits

for which there are authorized corrective maintenance tasks at the organizational

maintenance level.

21-2. EQUIPMENT ITEMS NOT COVERED. All equipment items for which corrective

maintenance is authorized at the organizational maintenance level are covered in

this chapter.

Section II.

WINTERIZATION KITS

21-3. PERSONNEL HEATER ELECTRIC FUEL PUMP REMOVAL, REPLACEMENT,

AND TEST.

WARNING

Smoking, sparks, or open flame are not allowed

within 50 feet of work area during this task.

TOOLS:

General mechanic tool kit

Flat-tip screwdriver

6-inch pliers

1/2-gallon container

Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680

SUPPLIES:

Fuel pump cover gasket

Fuel pump cup gasket

Rags

PERSONNEL:

Two

EQUIPMENT

CONDITION: Truck parked, engine off, handbrake set.

Preliminary Procedures.

(1) Disconnect battery ground cable. Refer to Part 1, para 7-44.

(2) Turn off personnel heater, powerplant heater, and shutoff cocks. Refer

to TM 9-2320-211-10.