FRAME 2 - TM-9-2320-211-20-3-20499

TM 9-2320-211-20-3-2

FRAME 2

Place clevis (1) over snatch block (2), alining holes.

Put screw (3) through clevis (1) and snatch block (2) and using 1-inch

wrench, hold it.

3. Using 1 1/4-inch wrench, screw on and tighten nut (4).

4. Put two screws (5) through boom (6) and two spacers (7) and using 1 1/8-inch

wrench, hold them.

5. Using 1 1/8-inch wrench, screw on and tighten two nuts (8).

NOTE

Follow-on Maintenance Action Required:

1. Wind winch cable on cable drum. Refer to

TM 9-2320-211-10.

2. Prepare crane for travel. Refer to

TM 9-2320-211-10.

END OF TASK

18-203