FRAME 2 - TM-9-2320-211-20-3-20476

TM 9-2320-211-20-3-2

Start engine. Put transmission in fifth gear position, then put

Soldier A 1.

transfer in neutral position, and power divider lever in DOWN

position. Put hydraulic pump control lever in ENGAGE position.

Refer to TM 9-2320-211-10.

WARNING

Always wear leather gloves when handling winch cable.

Never let cable run through hands. Rusty or broken

wires can cause injury.

CAUTION

Keep tension on cable whenever winch drum is turning.

Failure to do so will cause cable to snarl.

Soldier B 2. Hold cable (1) so that there is no slack. Watch winch drum

(2) to see that cable is winding tightly and evenly.

Soldier A 3. Pull hoist control lever (3) to UP position and hold it.

Soldier B 4. Tell soldier A to stop winch drum (2) when you are 15 feet

from end of cable (1).

Soldier A 5. Let go of hoist control lever (3) to stop winch drum (2) from

turning.

6. Stop engine. Refer to TM 9-2320-211-10.

GO TO FRAME 3

18-180