Cleaning, Inspection and Repair. - TM-9-2320-211-20-3-20451

TM 9-2320-211-20-3-2

Cleaning, Inspection and Repair.

WARNING

Dry cleaning solvent is flammable. Do not use near

an open flame. Keep a fire extinguisher nearby when

solvent is used. Use only in well-ventilated places.

Failure to do this may result in injury to personnel

and damage to equipment.

Eye shields must be worn when using compressed

air. Eye injury can occur if eye shields are not used.

(1) Wash all parts in solvent.

(2) Using compressed air, blow out filter element from inside, to be sure

filter element is clean.

(3) Check that all metal parts are not worn or damaged.

(4) Check that filter element has no tears or holes.

(5) Throw away all damaged parts and get new ones in their place.