Adjustment. - TM-9-2320-211-20-3-20376

TM 9-2320-211-20-3-2

Adjustment.

(1) Clevis adjustment.

FRAME 1

NOTE

Turn clevis (1) to the right to shorten control rod

assembly (2). Turn clevis to the left to lengthen

control rod assembly.

1. Using pliers and 3/4-inch wrench, hold clevis (1) and turn nut (3) to right to

loosen it.

2. Using pliers, take out cotter pin (4) and pull out clevis pin (5). Throw away

cotter pin.

3. Turn clevis (1) to right or left to adjust length of control rod assembly (2).

4. Aline holes in clevis (1) with hole in lever (6) and put in clevis pin (5).

5. Using 3/4-inch wrench, turn nut (3) to left to tighten it.

6. Using pliers, put in new cotter pin (4) and bend open ends of cotter pin.

END OF TASK