Replacement. - TM-9-2320-211-20-3-20356

TM 9-2320-211-20-3-2

Replacement.

FRAME 1

WARNING

Rear winch assembly (1) is heavy. Rig hoist chain on rear

winch assembly so that it does not slide. Sliding of rear

winch assembly could cause serious injury to personnel and

damage to equipment.

Using hoist as shown, lift rear winch assembly (1) into place

and aline four mounting screw holes.

Soldier A

Working under truck, put in four screws (2), two on each side

of rear winch assembly (1) as shown.

Soldier B

Place four nuts and lockwashers (3) on four screws (2).

Using 1 1/2-inch wrench, hold four nuts and lockwashers (3).

Tell soldier A when ready.

Soldier A

Using 1 1/2-inch socket wrench with torque wrench, tighten

four screws (2) to 200 to 235 pound-feet.

Take hoist chains off rear winch assembly (1). Take away

hoist.

GO TO FRAME 2