REAR WINCH ASSEMBLY REMOVAL AND REPLACEMENT (TRUCK M543A2).

TM 9-2320-211-20-3-2

1 x 11-inch brass tip drift pin

1 1/2-inch socket wrench

TOOLS:

punch

1 1/2-inch wrench

Medium ballpeen hammer

1 5/16-inch wrench (2)

9/16-inch wrench

Hoist, 2 ton capacity

7/16-inch wrench

Pliers

Mallet

Torque wrench, 600-pound-

feet capacity

SUPPLIES: Length of wood, 2 x 4 x 36 inches

PERSONNEL: Two

EQUIPMENT CONDITION: Truck parked, engine off, handbrake set.

Preliminary Procedures.

(1) Remove drive chain. Refer to para 18-8.

(2) Remove driven sprocket shear pin. Refer to para TM 9-2320-211-10.

(3) Tell direct support to remove driven sprocket.

(4) Swing boom to side. Refer to TM 9-2320-211-10.