FRAME 2 - TM-9-2320-211-20-3-20317

TM 9-2320-211-20-3-2

Using hoist, lift front winch and roller assembly (1) to clear front bumper

(2).

Using 3/4-inch wrenches, screw in and tighten three screws, flat washers,

and lockwashers (3) on both sides of front winch and roller assembly (1).

Using 3/4-inch wrenches, screw in and tighten three screws with flat

washers (4) and three locknuts (5) on both sides of front winch and

roller assembly (1).

Put propeller shaft front universal joint on yoke on winch driveshaft.

Refer to Part 1, para 10-11.

Take off chain sling and hoist. Move hoist away.

END OF TASK

18-21