Assembly. - TM-9-2320-211-20-3-20198

TM 9-2320-211-20-3-2

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

c. Cleaning, Inspection, and Repair.

(1) Using solvent, clean dirt and grease from all parts.

(2) Check that all parts have no cracks, breaks or dents.

(3) If parts are damaged, get new ones in their place.

d. Assembly.

FRAME 1

1. Aline holes in bracket (1) with holes in plate assembly (2).

2. Push two screws (3) through holes in plate assembly (2).

3. Using 3/4-inch wrenches, screw on and tighten two nuts (4).

4. Aline holes in bracket (5), plate assembly (2), and carrier plate (6).

5. Push two screws (7) through holes in bracket (5). Put on washers (8).

6. Using 9/16-inch wrenches, screw on and tighten two nuts (9).

END OF TASK