Replacement. - TM-9-2320-211-20-3-20093

TM 9-2320-211-20-3-2

Replacement.

FRAME 1

Put wheel bearing cone (1) into inner wheel bearing cup (2). Put wheel

bearing cup into hub (3) as shown. Take wheel bearing cone out of wheel

bearing cup.

Using hammer and brass drift, lay brass drift on top of wheel bearing cup

(2) as shown. Tap brass drift until wheel bearing cup is in hub (3).

Using hammer and brass drift, tap sides of wheel bearing cup (2) evenly

all around until it is seated all the way down inside hub (3).

Turn over hub and brake drum assembly (4) and do steps 1 through 3

again for outer wheel bearing cup (5).

GO TO FRAME 2