Cleaning. - TM-9-2320-211-20-3-20060

TM 9-2320-211-20-3-2

Cleaning.

NOTE

This task is for both inner and outer wheel

bearing cones.

FRAME 1

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when sol-

vent is used. Use only in well-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

NOTE

All old lubricant must be taken off bearing cones (1)

during cleaning. Soak bearing cones as long as needed

to take off all old lubricant.

Soak bearing cone (1) in solvent.

Rinse bearing cone (1) in clean solvent.

WARNING

Do not dry bearing with compressed air. Spinning

bearings may explode and cause serious injury to

personnel.

3. Let bearing cone (1) dry.

4. Using clean rags, wipe all old grease from inside hub (2).

END OF TASK