FRAME 2 - TM-9-2320-211-20-3-10828

TM 9-2320-211-20-3-1

FRAME 2

Using 7/16-inch wrench, unscrew bleeding screw (1) 3/4 turn. Look for air

bubbles in hydraulic fluid in container (2).

When there are no air bubbles for five seconds, using 7/16-inch wrench,

tighten bleeding screw (1). Make sure that bleeding screw is screwed on

tightly.

Take bleeding hose (3) and 7/16-inch wrench off bleeding screw (1). Take

bleeding hose out of container (2) and dump hydraulic fluid in contaminated

oil container. Do not dump fluid on ground.

Disconnect bleeder tank from master cylinder. Refer to para 12- 14e.

END OF TASK

12-96