Bleeding Air-Hydraulic Cylinder.

TM 9-2320-211-20-3-1

Connect bleeder tank to master cylinder. Refer to para 12-14a.

Using clean cloth, clean upper bleeding screw (1) and lower bleeding screw

(2) on air hydraulic cylinder (3).

Put 7/16-inch wrench on upper bleeding screw (1).

Put one end of bleeding hose (4) on upper bleeding screw (1).

Put other end of bleeding hose (4) into transparent container (5). Put

hydraulic fluid into container until container is 1/4 full. Make sure that

end of bleeding hose is below level of fluid in container.

GO TO FRAME 2