Replacement. - TM-9-2320-211-20-3-10801

TM 9-2320-211-20-3-1

Replacement.

NOTE

Take caps off all lines and fittings.

(1) Hydraulic lines and clamps.

CAUTION

Fittings are made of soft brass. They can be

very easily stripped if tightened too much.

Tighten fittings just enough to stop fluid from

leaking.

NOTE

Hydraulic line on the forward-rear axle is

used for this typical procedure.

FRAME 1

Using 1/2-inch wrench, hold multiple connector (1). Using 7/16-inch com-

bination box and open end wrench, put in tube nut (2).

GO TO FRAME 2