FRAME 3 - TM-9-2320-211-20-3-10752

TM 9-2320-211-20-3-1

Using 6-inch ruler, check alinement of brake lining (1) with brake drum (2).

NOTE

Brake lining must be flush with rim of brake drum within

-1/32-inch to +3/32-inch.

If brake lining (1) lines up with brake drum (2), using torque wrench, tighten

nut (3) to 153 to 196 pound-feet and go to frame 4.

If brake lining (1) does not line up with brake drum (2), using 1 7/16-inch

wrench, unscrew and take off nut (3).

Using 1 5/16-inch wrench, unscrew and take out bolt (4).

Add washsers (5) between outer brake shoe (6) and transfer cover (7) until

brake lining (1) lines up with brake drum (2).

Go back to frame 2 and do steps 2 through 5 again.

Using torque wrench, tighten nut (3) to 153 to 196 pound-feet.

TO FRAME 4

12-20