Replacement - TM-9-2320-211-20-3-10726

TM 9-2320-211-20-3-1

b. Cleaning, Inspection, and Repair. Clean all dirt, mud, and grease from boot.

Check that boot has no punctures or tears. If boot is punctured or torn, put on

rubber patch. Refer to TM 9-2610-200-20.

Replacement.

Unzip zipper (1) on boot (2).

2. Wrap boot (2) around axle housing (3) with cloth side of zipper (1) toward

steering knuckle (4). Zipper must be in line with top of knuckle. Close

zipper.

3. Put a large amount of sealer cement on zipper teeth and cloth. Let cement set

for three to five minutes.

GO TO FRAME 2