Assembly - TM-9-2320-211-20-3-10591

TM 9-2320-211-20-3-1

Inspection. Check intervehicular harness cable for cuts, breaks or folds.

Check that cable cover is not worn. If cable is damaged, get a new one.

Assembly.

NOTE

Coat surface of insert and contact pins with soluble

oil to make assembly easier.

Put insert (1) into rear of plug body (2).

Put step plate (3) in front of insert (1) and put on mechanical puller (4)

as shown.

Using puller (4) and wrench, press insert (1) into plug body (2).

GO TO FRAME 2