FRAME 5 - TM-9-2320-211-20-3-10581

TM 9-2320-211-20-3-1

Be very careful not to short positive and negative battery

posts against retainer. This could cause retainer to melt

and battery to explode, causing injury to personnel and

damage to equipment.

Line up center hole and four slots in battery retainer (1) with five clamp

bolts (2).

Place battery retainer (1) over batteries (3) and five clamp bolts (2).

Put five flat washers (4) and five lockwashers (5) onto five clamp

bolts (2).

Using 9/16-inch wrench, screw on and evenly tighten four corner clamp

bolt nuts (6).

Using 5/8-inch wrench, screw on and tighten center clamp bolt nut (7).

TO FRAME 6

7-229