FRAME 2 - TM-9-2320-211-20-3-10382

TM 9-2320-211-20-3-1

FRAME 2

WARNING

Starter (1) weighs about 50 pounds. Be careful when

lifting it into position. Hold starter up until top nut

(2) and lockwasher (3) are tightened.

Soldier A 1. Working under truck, lift starter (1) up into position and push

it onto three studs (4).

NOTE

If starter (1) does not seat firmly agsinst flywheel housing

flange (5), do not force it. Take starter out, turn

starter drive gear slightly, and do step 1 again.

Soldier B 2. Working through side of engine compartment using 15/16-inch

wrench, screw on and tighten top nut (2) and lockwasher (3).

Soldier A 3. Working under truck, using 15/ 16-inch wrench, screw on and

tighten two lower nuts (6) and lockwashers (7).

GO TO FRAME 3

7-30