FRAME 8 - TM-9-2320-211-20-3-10368

TM 9-2320-211-20-3-1

WARNING

Be very careful when using jumper wire. Shorting

wire to ground can burn connector pins or wiring and

can cause injury to personnel.

Push male connector (1) of jumper wire (2) into pin B of generator

receptacle (3).

Push female connector (4) into pin A of regulator connector (5).

Lightly touch and immediately pull away the ends (6) of jumper wire (2)

and jumper wire (7).

Disconnect battery ground cable. Refer to para 7-44.

Pull male connector (1) out of generator receptacle (3) and pull female

connector (4) out of regulator connector (5).

GO TO FRAME 9

7-16