Replacement. - TM-9-2320-211-20-3-10361

TM 9-2320-211-20-3-1

Replacement.

WARNING

Dry cleaning solvent is flammable. Do not use near an

open flame. Keep a fire extinguisher nearby when sol-

vent is used. Use only in well-ventilated places. Fail-

ure to do this may result in injury to personnel and

damage to equipment.

NOTE

If key is taped to shaft, take off tape. Clean key and

shaft with solvent.

With generator (1) on bench, put key (2) in slot in generator shaft (3).

Line up keyway in generator pulley (4) with key (2) in generator shaft (3).

Put generator pulley (4) onto generator shaft (3). Make sure key (2) does

not show at back of pulley.

Screw on and hand tighten locknut (5) with washer (6) to generator shaft

(3).

TO FRAME 2