FRAME 2 - TM-9-2320-211-20-3-10135

TM 9-2320-211-20-3-1

Using 9/16-inch open end wrench, hold tee fitting (l). Using 7/16-inch com-

bination box and open end wrench, screw on and tighten tube nut (2).

2. Put clamp (3) on air vent tube (4).

3. Using 9/16-inch open end wrench, screw in and tighten capscrew (5).

4. If more than one clamp holds tube in place, do steps 2 and 3 again for each

clamp.

5. Put on any plastic straps which were taken off.

NOTE

Follow-on Maintenance Action Required:

1. Start engine. Refer to TM 9-2320-211-10.

2. Check that fuel lines and fittings have no leaks.

3. Stop engine. Refer to TM 9-2320-211-10.

4. Close hood. Refer to TM 9-2320-211-10.

END OF TASK

TA 105179

4-51