Air vent tubes and bushings.

TM 9-2320-211-20-3-1

(2) Air vent tubes and bushings.

NOTE

The air vent tube from the air manifold to the

tee assembly along the right side frame is used

for this procedure.

Refer to TM 9-2320-211-10.

Open hood.

Using 1/2-inch open end wrench, hold connector (1). Using 7/16-inch

combination box and open end wrench, unscrew and take off tube nut (2).

Using 5/8-inch open end wrench, hold bushing (3). Using 1/2-inch wrench,

unscrew and take off connector (1).

Using 5/8-inch open end wrench, unscrew and take off bushing (3).

GO TO FRAME 2

4-40