FRAME 2 - TM-9-2320-211-20-3-10101

TM 9-2320-211-20-3-1

Working under right front fender, aline two clamps (l), two screws (2), and

two nuts (3) holding plastic tube (4). Using 7/16-inch wrenches, screw on

and tighten two nuts (3).

Aline air tube (5) with right side panel (6). Using 7/16-inch wrenches, put

on and tighten three screws (7) and three nuts (8).

Using 9/16-inch wrench, put in vent line connector (9),

Using 7/16-inch and 9/16-inch wrenches, screw on plastic tubing (4) to vent

line connector (9).

Using pipe wrench, screw in and tighten adapter (10).

TO FRAME 3

4-17