Replacement. - TM-9-2320-211-20-3-10085

TM 9-2320-211-20-3-1

Replacement.

FRAME 1

Line up holes in fuel transfer pump (1) with holes in bracket (2).

Place screws (3) through holes in fuel transfer pump (1) and bracket (2).

Using 7/16-inch wrenches, screw on and tighten nuts with washers (4).

Using 5/8-inch and 3/4-inch wrenches, screw on and tighten coupling on fuel

transfer pump outlet hose (5).

5. Using 5/8-inch and 3/4-inch wrenches, screw on and tighten coupling fuel

transfer pump inlet hose (6).

6. Put electric lead clamp (7) in place. Using l/2-inch wrenches, screw on and

tighten nut (8).

7. Plug electrical connector (9) into receptacle (10).

NOTE

Follow-on Maintenance Action Required:

Reconnect battery ground cable. Refer to para 7-44.

END OF TASK