Pack Sealed Containers in Box.

TM 9-1330-200-34/TM 1330-34/1

(3) Pass seal wire through eye in swivel and

(4)

Materials. Tools and equipment include the

back through eye in hasp.

following:

(4) Draw end of wire through hole in seal and

(a) Table, work.

pull taut to remove slack.

(b) Tape, pressure sensitive.

(5) Conceal end of wire in lead seal and

crimp seal with hand lead seal press.

m. Pack Sealed Containers in Box.

(6) Repeat operation to seal remaining hasp

(1) Receive sealed container and packing

and swivel, if present.

material from preceding operations.

(7) Assemble and secure metal strapping

(2) Insert sealed container, tip end up, into

tightly around box using hand strapping machine. Do

packing box to form complete rows lengthwise and

not obstruct marking. Repeat operation, if necessary to

widthwise.

apply second strap.

(3) Place filler atop containers. Continue

(8) Transfer sealed and strapped box to

packing containers if required, to complete second layer.

carrier for return to storage site.

(4) Add sufficient fillers to ends, side, and top

(9) Material, tools, and equipment include

as required to assure a tight pack.

the following:

(5) Close cover and transfer box to next

(a) Conveyor.

operation.

(b) Strapping and sealing kit: 5/8 inch

n. Seal and Strap Packing Box.

wide x 0.023 inch thick strapping.

(1) Receive packed grenade in box from

preceding operation.

(d) Seal wires and seals.

(2) Swing hasp over swivel and turn swivel

180to latch hasp.

(e) Gloves, leather palm.

(f) Face shield or safety goggles.

5-15