Figure 5-7. Placing fuze in packing support.

TM 9-1330-200-34/TM 1330-34/1

(2) While

holding

container

firmly

together, apply one and one-fourth wraps of pressure

(8) Transfer

closed

container

sensitive tape around joint formed by tip and bottom of

operation.

container, leaving a one and one-half inch pull tab.

When applying tape to container, use at least 10 pounds

(9) Material, tools and equipment include a

tension. Assure gap between container top and bottom

work table.

does not exceed 1/8 inch.

l. Tape Container

(3) Transfer

sealed

container

(1) Receive packed grenade in container

operation.

from preceding operation.

Figure 5-7. Placing fuze in packing support.

(2) Insert sealed container, tip end up, into

(4) Materials. Tools and equipment include

the following:

packing box to form complete rows lengthwise and

widthwise.

(a) Table, work.

(3) Place filler atop containers. Continue

(b) Tape, pressure sensitive.

packing containers if required, to complete second layer.

m. Pack Sealed Containers in Box.

(4) Add sufficient fillers to ends, side, and top

as required to assure a tight pack.

(1) Receive sealed container and packing

material from preceding operations.