 |
|||
|
|
|||
|
Page Title:
Table 5-9. Painting and Marking of Grenade, Launcher: Non-Lethal, Distraction, M98. |
|
||
| ||||||||||
|
|
 TM 9-1330-200-34/TM 1330-34/1
Grenade
Body
Color of
Height of
Marking
color
markings
letters (in.)
Green No. 34540
Black No. 37038
GREN LCHR
M98
0.25 +/- 0.05
NON-LETHAL
DISTRACTION
M98
Brown No. 30117 or
0.31
Brown Band
No. 30140
Black No. 37038
0.25 +/- 0.05
Black Band
Black No. 37038
0.25
Lot Number
Black No. 37038
6.0 x 6.0
M98 Pattern Photograph,
Dwg 13-19-741
Grenade
Body
Color of
Height of
Marking
color
markings
letters (in.)
Green No. 34540
Black No. 37038
GREN LCHR
M99
0.25 +/- 0.05
NON-LETHAL
BLUNT TRAUMA
M99
Brown No. 30117 or
0.31
Brown Band
No. 30140
Black No. 37038
0.25 +/- 0.05
Black Band
Black No. 37038
0.25
Lot Number
Black No. 37038
6.0 x 6.0
M99 Pattern Photograph,
Dwg 13-19-740
(1) Receive
grenade
from
rust
removal
WARNING
operation.
WEAR PAINT SPRAY RESPIRATOR.
(2) Apply masking tape over all areas to be
protected from enamel, especially over movable portions
(b) Spray Method. While suspending
of hand grenade fuze to prevent possible interference
grenade, apply protective coating with paint spray gun or
with proper functioning (fig. 5-1). Leave prongs of hand
aerosol spray can, if available. Reposition grenade as
grenade safety pin fully exposed.
necessary to expose uncoated portion, then repeat
operation to complete coverage.
(3) Attach hand grenade suspension device (fig.
(5) Hang suspended grenade on rack (fig. 5-2)
until coating dries.
(4) Apply protective coating.
(6) Apply masking tape in order to paint body
union or rifle grenade.
(a) Dip Method. While suspending grenade
as shown in figure 5-5, dip body portion in enamel. Keep
(7) Allow paint on body union to dry.
grenade body and fuze joint above surface of paint.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals