Follow on tasks - TM-5-5420-279-230904

TM 5-5420-279-23

(6)

Fit the snap ring to the opposite end of the lower cylinder pin (13).

(7)

Locate the upper pin spacers in the positions noted during removal and insert the upper

cylinder pin (8).

(8)

Align the slot in the upper cylinder pin (8).

(9)

Insert the stop mechanical (10) as noted during removal.

(10)

Secure the stop mechanical in place with the set screws (9).

(11)

Fit the snap ring to the opposite end of the upper cylinder pin (8).

(12)

Connect the hydraulic pipes (4) and (5) to the jib cylinder (3).

(13)

Connect the electrical harness (6) and (7) to the jib cylinder (3).

(14)

Grease the upper and lower pins through the grease fittings.

Follow on tasks

(1)

Operate the crane in accordance with the operator's manual TM 5-5420-279-10.

(2)

Check for leaks.

6-160