Quantcast Install - TM-5-5420-279-230891

 

Click here to make tpub.com your Home Page

Page Title: Install
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
CRANE - ROTATE GEAR MOTOR, BRAKE AND TRANSMISSION
Up
TM-5-5420-279-23 Dry Support Bridge (DSB) (NSN
Next
Schematic Drawing - TM-5-5420-279-230892
TM 5-5420-279-23
(11)
Note the orientation of and remove the transmission (8), place on a suitable working
surface.
(12)
Remove the two bolts (12) and lock washers (11) securing the retaining plate (10) to the
shaft of the transmission.
(13)
Remove the retaining plate (10) and the gear (9).
(14)
Check all threaded components for wear and damage.
(15)
Check that the mating faces of the motor, brake assembly and transmission are clean.
(16)
Check that the gear (9) is not damaged or worn.
b.
Install
(1)
Fit the gear (9) to the transmission (8).
(2)
Fit the retaining plate (10) to the gear (9) and secure in place with the two lock washers
(11) and bolts (12).
(3)
Fit the transmission (8) to the crane column in the position noted during removal.
(4)
Apply thread locking compound to the twelve bolts (7).
(5)
Secure the transmission (8) to the crane column with the twelve bolts (7). Torque to 130
lb/ft.
(6)
Fit the brake assembly (5) to the transmission (8) in the position noted during removal.
(7)
Apply thread locking compound to the eight bolts (6).
(8)
Secure the brake assembly (5) to the transmission (8) with the eight bolts (6).
(9)
Fit the hydraulic pipes to the rear of the brake assembly (5) in the positions noted during
removal.
(10)
Coat the o-ring (4) with clean hydraulic oil.
(11)
Fit the o-ring to the motor (1).
(12)
Fit the motor (1) to the brake assembly (5), ensure that the o-ring is seated correctly and
secure in place with the four washers (3) and bolts (2).
(13)
Fit the hydraulic hoses to the motor (1) and break assembly (5) in the positions noted
during removal.
(14)
Fill the brake assembly with oil. See. See operator's maintenance TM 5-5420-279-10.
c.
Follow on tasks
(1)
Operate the crane in accordance with the operator's manual TM 5-5420-279-10.
(2)
Check for hydraulic oil leaks and for oil leaks at the brake assembly.
6-147

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.