 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-5420-279-23
b.
Install
(1)
If removed earlier, apply thread locking compound to the screws (11 and 14).
(2)
Fit the side wear pad to section 2 (7 and 2) and align the screw holes.
(3)
Secure the side wear pad (13) in position with the screws (14).
(4)
Fit the wear pad (12) to section 2 (7 and 2) and secure with the screw (11).
(5)
Align and insert slide frame section two (7 and 2) into section three (9 and 10).
(6)
When section two (7 and 2) has been inserted, three feet, fit the stop pads (8) to section
three (9 and 10). See unit maintenance procedure 5-081.
(7)
Align and insert slide frame section one (3 and 5) into section two (7 and 2).
(8)
When section one has been inserted, six feet, fit the stop pads (6) to section two (3 and 5).
See unit maintenance procedure 5-080.
(9)
Fully insert sections one (3 and 5) and sections two (7 and 3).
(10)
Connect the slide frame to the vehicle. See operator's manual TM 5-5420-279-10.
(11)
Remove the slide frame support (1).
c.
Follow on task
(1)
Carry out a full operation check of the slide frame in accordance with the operator's manual
TM 5-5420-279-10.
6-108
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals