Fit the launch beam drive manifold assembly (10) to the launch beam drive.
Apply thread locking compound to the four bolts (8).
Secure the launch beam drive manifold assembly (10) using the four bolts (8) and washers
Fit the hydraulic pipe work (2, 3, 4, 5, 6 and 7) to the positions noted during removal.
Check and top up, if necessary, the hydraulic oil level at the hydraulic reservoir.
Follow on tasks
Switch the battery shutoff switch to the on position.
Check the operation of the launch beam drive.
Check for hydraulic oil leaks.
Fit the launch beam drive top cover. Refer to unit maintenance procedure 5-035.