A-FRAME - LOWER CENTER BEAM

TM 5-5420-279-23

A-FRAME - LOWER CENTER BEAM

This task covers:

a. Remove

b. Install

INITIAL SETUP:

Tools Required

Tool Kit, General Mechanic's, Automotive (GMTK)

Materials Required

Thread locking compound, loctite 243

Personnel Required

Four

Equipment Conditions

A-Frame removed from launch vehicle and placed on a suitable working

surface

WARNING

CRUSH INJURY. TO AVOID INJURY TO PERSONNEL WHEN WORKING ON THE

LOWER CENTER BEAM ALWAYS ENSURE THAT THE WEIGHT OF THE LOWER

CENTER BEAM IS SUPPORTED.

SLIP AND FALL INJURY. PERSONNEL MAY SLIP ON SPILLED HYDRAULIC

FLUID. SUITABLE CONTAINERS AND FLUID ABSORBENT MATERIALS ARE TO

BE USED TO CONTAIN SPILLAGE.

Change 1 6-17