Launch Equipment Re-Fitting-continued

TM 5-5420-279-23

(15)

Unfold the A-Fame legs. Press A-Frame folds deploy button on the interface panel, until

deployed light comes on.

WARNING

INJURY TO PERSONNEL. NEVER USE FINGERS TO PUSH PINS IN OR OUT OF

HOLES. SERIOUS PERSONAL INJURY WILL RESULT IF THIS INSTRUCTION IS

NOT OBSERVED.

(16)

Insert the two A-Frame hinge locking pins and clips on each side.

20, 35

14, 15, 16, 17

3, 4, 25, 34, 39

686A663

(17)

Replace both folding walk-way ladders by remove R-clip from pivot pin remove pivot pin

from ladder. Hold ladder in place replace pivot pin and R-clip, secure in stowed position

with retaining strap.

(18)

Replace A-Frame upper ladder by removing R-clip from pivot pin remove pivot pin from

ladder hold ladder in place replace pivot pin and R-clip, secure in stowed position with

retaining strap.

(19)

Rotate the A-Frame legs, by pressing A-Frame rotate deploy button on the interface panel

until the deployed light comes on.

5-484