Launch Equipment Re-Fitting-continued

TM 5-5420-279-23

WARNING

INJURY TO PERSONNEL. ENSURE HYDRAULIC AND ELECTORAL SYSTEMS ARE

SWITCHED OFF WHEN CONNECTING OR DISCONNECTING HYDRAULIC

COUPLINGS AND ELECTRICAL CONNECTORS.

CAUTION

Check couplings and plugs against the ingress of dirt during transport,

contamination or damage to plugs and systems may result.

(8)

Re-connect both dove tail brackets to connect energy chains to slide frame.

(9)

Refit two bolts holding, dove tail brackets to slide frame.

(10)

Re-connect hydraulic quick release couplings inside both sides of the slide frame

(11)

Replace the spreader bars on the energy chains.

(12)

Re-connect electrical supply to moving slide frame junction box, earth cable at mil

connector and replace any cable ties to secure cables to slide frame pipe work.

MF-03

MOVING

SLIDE FRAME

JUNCTION BOX

MF-01

686A664

(13)

Remove the two rigging screws holding the slide frame together.

(14)

Remove the two A-Frame hinge locking pins and clips from each side.

5-482