 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-5420-279-23
1
4
2
3
5
a.
Remove
(1)
De-pressurize hydraulic system. Refer to unit maintenance procedure 5-118.
(2)
Position a suitable container to catch any hydraulic fluid spillage.
(3)
Remove the hydraulic hose (1) on the solenoid valve (2).
(4)
Remove the electrical cable plug (3) attached to the solenoid valve (2).
(5)
Remove the solenoid valve retaining bolt (4).
(6)
Check the electrical cable plug (3) for damage and cleanliness.
b.
Install
(1)
Position a new solenoid valve (2) on the cylinder (5).
(2)
Secure the solenoid valve (2) with a retaining bolt (4).
(3)
Fit the hydraulic hose (1) to the solenoid valve (2).
(4)
Fit the electrical cable plug (3) to the solenoid valve (2).
c.
Follow on tasks
(1)
Switch the battery shutoff switch to the on position.
(2)
Operate the tail lift in accordance with the operator's manual TM 5-5420-279-10, section 13
to expel any air in the hydraulic system.
(3)
Check that there are no hydraulic oil leaks and that the tail lift operates correctly.
5-447
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals