Remove - TM-5-5420-279-230685

TM 5-5420-279-23

Remove

(1)

When the stabilizer leg (1) is deployed in the vertical position, remove the pin (2) that

secures the retention cable (3).

(2)

Place a suitable container under the stabilizer leg to catch any spilled hydraulic fluid.

(3)

De-pressurize hydraulic system. See unit maintenance procedure 5-118.

(4)

Remove the electrical cable (4) at the micro switch.

(5)

Note the position of and remove the two hydraulic hoses (5) at the valve block on the

stabilizer leg (1).

(6)

Support the weight of the stabilizer leg (1) and remove the pin retaining clip (7) and the pin

(6)

(7)

Remove the two screws (8).

(8)

Remove the disk (9).

(9)

Remove the stabilizer leg (1).

(10)

Check all screw and coupling threads for damage.

(11)

Check the pipe support (10) for wear.

(12)

Check the hydraulic hoses for chaffing and crush damage.

(13)

Check the electrical cable and plug for damage.

5-429