5 - 138 HYDRAULIC SYSTEM - PTO PRESSURE SWITCH
This task covers:
Tool Kit, General Mechanic's, Automotive (GMTK)
Cable ties (As required)
Vehicle switched off and battery shutoff switch in the off position
Right hand engine side panels removed for access, see PLS TM 9-2320-364
SLIP AND FALL INJURY. PERSONNEL MAY SLIP ON SPILLED HYDRAULIC
FLUID. SUITABLE CONTAINERS AND FLUID ABSORBENT MATERIALS ARE TO
BE USED TO CONTAIN SPILLAGE.
Note the positions of and remove the two cables (3) connected to the PTO pressure switch
(1) by turning the two screws (4) counter-clockwise.
Remove the PTO pressure switch (1) from the PTO (2).
Fit the PTO pressure switch (1) to the PTO (2).
Fit the two cables (3) to the PTO pressure switch (1) in the positions noted during removal
using the two screws (4).