HYDRAULIC SYSTEM - STABILIZER MANUAL CONTROL VALVE

TM 5-5420-279-23

5 - 127 HYDRAULIC SYSTEM - STABILIZER MANUAL CONTROL VALVE

This task covers:

a. Remove

b. Install

INITIAL SETUP:

Tools Required

Tool Kit, General Mechanic's, Automotive (GMTK)

Materials Required

Thread locking compound, loctite 243

Lock washers (Qty 4)

Seal (As required)

Equipment Conditions

A-Frame deployed

WARNING

INJURY FROM EXTREME HYDRAULIC OIL PRESSURE. THE SYSTEM MUST BE

DE-PRESSURIZED BEFORE CARRYING OUT ANY WORK THE HYDRAULIC

SYSTEM.

SLIP AND FALL INJURY. PERSONNEL MAY SLIP ON SPILLED HYDRAULIC FLUID.

SUITABLE CONTAINERS AND FLUID ABSORBENT MATERIALS ARE TO BE USED

TO CONTAIN SPILLAGE.

NOTE

The stabilizer manual controls are fitted to the A-Fame stablizer manifold assembly (1).

The stabilizer manifold is protected by a cover which is held in position by eight screws

and lock washers. (Not shown). This must be removed to gain access to the stabilizer

manifold.

5-384