Quantcast CHASSIS - CAB EMERGENCY OVERRIDE SWITCH

 

Click here to make tpub.com your Home Page

Page Title: CHASSIS - CAB EMERGENCY OVERRIDE SWITCH
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Back
Follow on Task - TM-5-5420-279-230610
Up
TM-5-5420-279-23 Dry Support Bridge (DSB) (NSN
Next
Follow on Task - TM-5-5420-279-230612
TM 5-5420-279-23
5 - 115 CHASSIS - CAB EMERGENCY OVERRIDE SWITCH
This task covers:
a. Remove
b. Install
INITIAL SETUP:
Tools Required
Tool Kit, General Mechanic's, Automotive (GMTK)
Materials Required
Lock washers (Qty 6)
Equipment Conditions
Vehicle switched off and battery shutoff switch in the off position
a.
Remove
(1)
Remove the six screws (2) and lock washers (3) securing the panel (1) to the center
console in the vehicle cab.
(2)
Tilt the panel (1) forward.
(3)
Note the positions of the two electrical cables (5) on each end of the contactor (6).
(4)
Turn the cable securing screws counter-clockwise and remove the electrical cables (5).
(5)
Remove the contactor (6) from the emergency override switch (11) by pressing down on
the catch (12) on the side of the contactor (6).
(6)
Remove the locking plate (10) by turning the locking screw (9) counter-clockwise.
(7)
Remove the screws (8) and star washers (7) securing the emergency override switch (11)
and cover (4) to the panel (1).
(8)
Remove the emergency override switch (11) and cover (4) from the panel (1).
b.
Install
(1)
Fit the emergency override switch (11) and cover (4) to the panel (4).
(2)
Fit the screws (8) and star washers (7) securing the emergency override switch (11) and
cover (4) to the panel (1).
(3)
Fit the locking plate (10) to the emergency override switch (11).
(4)
Turn the locking screw (9) clockwise and tighten.
(5)
Fit the contactor (6) to the emergency override switch (11).
(6)
Fit the cables (5) to the contactor (6) at the positions noted during removal, secure in place
with the cable securing screws.

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc.