Install - TM-5-5420-279-230590

TM 5-5420-279-23

(10)

To remove the circuit breaker reset

button (13), turn the locking screw (10)

counter-clockwise.

(11)

Remove the Locking plate (11).

Remove the circuit breaker reset button

(13) complete with seal (12).

Install

(1)

Fit the circuit breaker reset button (13)

complete with seal (12) to the operator's

panel (4).

(2)

Fit the locking plate (11) to the circuit

breaker reset button (13).

(3)

Turn the locking screw (10) clockwise

and tighten.

(4)

Fit the circuit breaker (5) to the interface

enclosure bracket (6) and secure in

place with the nut and washer (7).

(5)

Fit the two cables (9) with the screws (8)

in the positions noted during removal.

Circuit Breaker Reset Button

(6)

Fit new cable ties to the operator's panel (4).

(7)

Fit the harnesses to the operator's panel in the positions noted during removal.

(8)

Fit the twelve plugs in the positions marked during removal.

(9)

Fit the operator's panel (4) to the interface enclosure (1) and secure in place with the

sixteen screws and washers (3).

Follow on tasks

(1)

Switch the battery shutoff switch to the on position.

(2)

Operate the launcher and check all systems for correct operation.

5-334